maxView Storage Manager – Change HTTPS Port

Du bist hier:
  • Haupt
  • Misc
  • maxView Storage Manager - Change HTTPS Port
< Alle Themen

You can change the port used by the maxView Storage Manager Web Server, if needed, to accommodate changes in your network or IT requirements. The Web Server can use any open port for communication. The default port is 8443. If you change the port, you must restart maxView Storage Manager for the change to take effect.

To change the Web Server port:

1. In the Enterprise View, select a system.
2. On the ribbon, in the System group, click System Settings.
3. When the System Settings window opens, click the Web Server tab.
4. Enter the new Web Server port. Optionally, click Secured Protocol to enable/disable secure communication over https.
5. Click Apply.
6. Restart maxView Storage Manager.